This is something really amazing: For every gallon of gas your Fresno car burns, it uses 12,000 gallons of air. All of that air has to be filtered to keep your engine clean.

That’s like a hundred gallons of air every block! The engine air filter is just another example of a very inexpensive part that has to do a tremendous amount of work. And when it works, everything goes well. But, when it doesn’t, well, it can lead to costly problems. Of course, your manufacturer recommends intervals for changing your air filter. But like most service intervals, where and how you drive your car affects when your filter needs to be changed.

Dusty conditions in and around Fresno or polluted city driving means you’ll need to change your filter more often. Your Ball Tire technician can check your filter for you. In fact, it’s often a routine part of an oil change.

When you think about it, a clogged air filter won’t allow as much air through as a clean filter. Your car needs this air to efficiently burn its fuel, giving you better fuel economy and performance.

Dirtier filters don’t work as well as clean ones. A filter can only hold so much, after that, it allows dirt to pass right into your engine. Air filters come in all shapes and sizes. They also come in different grades. There are high performance air filters available for most cars. These high performance filters cost a little more, but they increase horsepower and may improve fuel economy to boot.

So have your air filter checked. If it needs replacing, it doesn’t cost very much and it should easily pay for itself in better fuel economy before your next oil change.

Stop by Ball Tire at 4741 E Kings Canyon Rd, Fresno, California 93702, and we'll take a look at your air filter for you. Feel free to give us a call at 559-251-4283 to make an appointment.

For advice on how to make your sedan last longer, visit us at Ball Tire
4741 E Kings Canyon Rd
Fresno, California 93702
559-251-4283

These days many people in the Fresno area are really committed to making their cars last a long time. First thing: you've got to start with what you've got. It'd be ideal if people started with a brand new car, never missed a scheduled service item, paid attention to the severe service maintenance schedule and had regular inspections. But if you've had the vehicle for a while, or bought it used, its maintenance history is what it is; and that's where you start.

Go through the maintenance schedule for your sedan and see what's been done and when. Have your Fresno service advisor at Ball Tire do an inspection and come up with a list of stuff that needs to be done. Review the list and prioritize the work, talk about budget and make a plan to get caught up.

Making a plan is so important. Suppose you go in for an oil change and learn you need your cooling system serviced, a transmission service and are coming up on a timing belt replacement in the next 5,000 miles. You might be pretty overwhelmed.

To make it even more stressful, these are all very important systems that are expensive to repair if there's a failure. In consultation with your Fresno service advisor, you might decide to take care of the transmission on this visit, set an appointment for the cooling system service next month and get an estimate for the timing belt replacement so you'll be prepared for it in a few months.

Having a plan for taking care of these important services will set your mind at ease.

Your car might have an alignment problem if: it drifts or pulls to one side, your steering wheel is off center, you have uneven tire wear or your car doesn’t feel like it handles right. When all of a vehicle’s wheels are lined up exactly with each other, your wheels are in alignment. Running into potholes, smacking a curb or other object are great ways to knock your car out of alignment. Then one or more of your wheels starts pulling in a slightly different direction and the problems begin.

Driving for an extended time when you're out of alignment causes your tires to wear unevenly and excessively. This can be dangerous and expensive. You'll have to replace your tires sooner, but even worse - you may cause premature wear to your suspension system, which can be really expensive.

The front wheel alignment is adjustable on all vehicles, and the back wheels are also adjustable on some cars. The adjustment can go three different ways. The first adjustment is called toe. The next adjustment is called camber. And finally, there is castor. The engineers who designed your vehicle determined the alignment settings that will give you the best handling and safety.

There are several things involved in an alignment check. First, there's an inspection of the steering and suspension - it should be checked to see if anything's bent or broken. Then the tire condition needs to be inspected. From there, the vehicle is put on an alignment rack and an initial alignment reading is taken. If all four wheels are adjustable, they are lined up perfectly parallel with the vehicle's center line. If the back wheels aren't adjustable, a technician at Ball Tire can determine the direction they push and then aligns the front wheels to match.

Ball Tire
4741 E Kings Canyon Rd
Fresno, California 93702
559-251-4283

Like most things, your manufacturer has suggested a mileage interval for having your alignment checked. But if you run into a curb, pothole or something else that's given you a big jolt, pay attention to whether your vehicle is pulling to one side when you drive. It's better to have your alignment checked before waiting to see if there is uneven tire tread wear - by then, the damage is done.

Getting your alignment checked when needed is a great way to extend the life of your tires and suspension parts. It also makes sure that your tire meets the road properly for maximum performance and safety.

All new passenger vehicles on our Fresno California roads now have tire pressure monitoring systems – TPMS for short. They are designed to alert you if your tires are under inflated. Since they are fairly new, a lot of people have questions about TPMS.

First off, the most important thing is that you still need to check your tire pressure every week – or at least every time you gas up. The TPMS system alert comes in when your tire is twenty percent below the factory recommendation. So if the recommended pressure is thirty five pounds per square inch, the TPMS warning won't come on until the pressure is at twenty eight pounds. That's significantly under-inflated. Enough to raise safety concerns.

The worst is tire failure. A severely under inflated tire can overheat and fail. Also, handling degrades to the point that you may not be able to steer out of trouble. Also under-inflated tires wear out faster and they waste fuel. So it's costly to not stay on top of proper inflation.

What's the practical value of the TPMS system? Well, it's twofold. First, it can alert you when your tire is losing pressure due to a puncture or a bent rim. That's an important warning that you might not have gotten until next time you gassed up.

The second is that we all occasionally forget to check our tire pressure. So it's a failsafe system to let you know there's a problem brewing.

Other things can cause your TPMS system to go off. The system also monitors itself. The sensors that are mounted in the wheels have little batteries that send a signal to the monitor. The batteries go dead over time and the TPMS system will let you know. And the sensors could break. Also road salt from our Fresno California roads can ruin them.

There's also a hassle factor that your Fresno California tire center has to contend with. For example, when you have your tires rotated in Fresno, the TPMS system has to be re-calibrated so that it knows which tire is on which corner of the car. Same is true for when you have new tires or winter tires installed. Flat repairs, as well.

That takes extra time. And it requires the right equipment and training. Special – and expensive – tire change machines need to be used with some sensors. It's all complicated by the fact that there are a number of different TPMS systems in use so the tire professionals at Ball Tire need equipment and training for each kind. Tire centers have had to raise the price of some of these basic services to offset their increased costs.

Also if you add custom wheels on your sedan, you need to put in new TPMS sensors if your originals won't work on the new rims. If you don't your TPMS light will be on constantly and you won't have the benefit of the warning system.

All in all, the mandated TPMS systems will save lives, so they're worth the added hassle and expense.