Most folks around Fresno have had a flat tire. You know it’s inconvenient and a pain. Our tires are important. Keeping them in good working order isn’t just a big safety issue – it also has a financial impact. With high gas prices, we’ve all heard about the importance of keeping proper tire pressure to save on gas. In addition, proper inflation promotes even tread wear so your tires last longer.

There’s another danger to under-inflated tires. Low tire pressure puts added stress on the structure of the tire itself, causing it to break down prematurely. Also, under-inflated tires generate more heat which also reduces tire life. So get those slow leaks fixed quickly – don’t just keep airing them up every few days. You want to avoid serious tire damage.

Tires can also be damaged by road hazards in and around Fresno. Punctures, cuts and impacts on curbs or potholes can also cause damage that could lead to tire failure. Sometimes, it’s something that a visual inspection would reveal. Take the opportunity to check your tires when you’re gassing up. Look for slashes, missing chunks, nails or screws in the tread or just uneven wear. Of course check the air pressure too.

Now tire damage can be on the inside where you can’t see it until it’s removed from the wheel. Such damage could come from a severe impact, driving on a flat or even just low pressure. Some punctures can cause internal damage that are too severe to be repaired. You may see our Ball Tire professionals take the time to remove your flat from the rim and inspect the inside before repairing it, which means we're just following good procedure.

Now some tires just can’t be repaired. A puncture may be too large to plug. Also, the puncture could be in a location that’s not safe to repair like in the sidewall or outer portion of the tread. So called run-flat tires should not be repaired because their design is such that internal damage can’t be detected by a visual inspection.

It is also important that repairs should only be done by a qualified tire specialist like the ones we have at Ball Tire. You can buy self repair kits – save those for emergencies, like when you’re off-roading and need a quick fix so you can hobble back to civilization and get professional help. If you need to use a repair-in-a-can product, remember it’s a temporary measure only and your tire needs to be properly repaired as soon as possible.

Here are some other considerations: Repairing a flat may void your tire manufacturer’s warranty – just something to keep in mind. Also, if you repair a speed rated tire, you should not use it in any motorsports or operate it above legal speed limits. Your tire professional will repair your tire whenever it’s safe to do so and he’ll advise you when it’s better to replace it. So watch those curbs and keep the air – on the inside.

Ball Tire
4741 E Kings Canyon Rd, Fresno, California 93702
559-251-4283

The hottest Fresno news story may be different everyday, but there’s one topic that seems to come up over and over again – the price of gas in Fresno. But we’ve found several basic things that any Fresno vehicle owner can do to greatly reduce their gas consumption, save money, and help the Fresno environment. You can really impact your fuel economy by how you drive – but first, here’s a review of things you can do for your car that’ll save gas no matter how you drive.

The first one is keeping your tires properly inflated. That can save two miles per gallon. Driving on low tires is like driving through sand – your car just has to work harder. Most Fresno service centers will fill up your tires for free, so just ask your service advisor. Also, make a habit of checking your tire pressure whenever you get gas in your car. Many Fresno gas stations have an air hose you can use for free.

Another important item is to keep your air filter clean. An air filter all clogged up with dirt and bugs doesn’t let enough clean air through to efficiently burn fuel. Using a dirty air filter will cost you almost two miles per gallon in reduced fuel efficiency. And worn spark plugs can cost another two. A spark plug can fire as many as 3,000,000 times for every thousand miles driven. Check the owner’s manual for replacement recommendations.

The biggest item is the oxygen sensor. This device provides the engine management computer with information it needs to fine-tune the fuel/air mix. When that’s messed up it can cost up to three miles per gallon. And of course, there’s dirty or substandard oil. Dirty oil causes extra drag. The wrong grade may be too thick. That’s another .4 miles per gallon right there.

One item Fresno residents seldom think about is their gas cap. A worn, loose or missing gas cap can cost another two miles per gallon. Adding up all of these worn, missing or sub-par items leads to a total of almost 11.4 miles per gallon in reduced fuel efficiency! And with current gas prices in the Fresno area, the cost really adds up. Taking care of these simple maintenance items will save big bucks at the pump.

Now most people aren’t missing on all of these items, but think about which ones might affect you right now! And don’t forget tune-ups, dragging brakes, low transmission fluid, fuel system cleaning, wheels out of alignment, PCV valve, fuel filter and other key services spelled out in your owners’ manual.

Ball Tire knows all this stuff and can tell you when you’re scheduled to take care of each item. Create a system of your own to track your service schedules, or just use the computer system at Ball Tire – which may also be updated with recall notices and maintenance schedule items from your manufacturer.

Today we want to talk about a very important system in our cars – the cooling system. It’s one of those things that you don’t give much thought to until it fails and then you’re stranded by the side of the road.

Cooling systems fail more often than any other mechanical system – usually because of neglect. Don’t you hate it when something breaks, and you could have done something to prevent it?

The good news is that if you take care of your cooling system it can keep working for the life of your car.

Here at AutoNetTV, we emphasize preventive maintenance services like replacing your coolant according to the factory schedule. But the various parts that make up the cooling system need attention too. The major components of the cooling system are the water pump, freeze plugs, the thermostat, the radiator, cooling fans, the heater core, the pressure cap, the overflow tank and the hoses.

It sounds complicated, but we don’t have to be experts – we can leave that to our friendly service technicians at Ball Tire. But, having an overview will help us remember to take care of our cooling systems.

Most people would be surprised to know that burning fuel in your engine produces up to 4,500 degrees of heat. And all that heat has to be dealt with. If the heat can’t be drawn off the engine, the pistons will literally weld themselves to the inside of the cylinders – then you just have to throw the engine away and get a new one. That would cost thousands of dollars.

Now the water pump is what forces the coolant through passages in the engine to absorb heat. The pump is driven by a belt that needs replacement from time to time. And the water pump will eventually wear out and need to be replaced. Spending some money on replacing the belts and water pump is much less than the cost of repairing the massive damage that can be done when an engine seizes.

There’s another little part of the coolant system that protects the engine. It’s called a freeze plug. If you remember from high school chemistry, water expands when it freezes. In very cold areas, the coolant can actually freeze when the vehicle is left sitting.

It is hard to believe, but the expanding frozen coolant can actually crack the engine block. The freeze plugs fit into the engine block. They fit tight enough to withstand the pressure of a running engine, but can expand or pop out if the coolant freezes. These little things save a lot of engine blocks.

That brings up a good point. An engine has to work in all kinds of temperatures – extremely hot as well as very cold. How does the cooling system adapt to external temperatures as well as varying operating conditions?

Well, it’s much like the way you keep your house at a comfortable temperature all year round – with a thermostat. The thermostat in your car controls how much coolant flows through your engine. When the engine is cold, it restricts coolant flow until the engine comes up to an efficient operating temperature. Then it starts opening up to move more coolant to keep the temperature within a specified range.

The thermostat needs to be replaced from time to time as well. It’s easy to diagnose a failed thermostat and is fairly inexpensive to replace. We can do this for you at Ball Tire in Fresno, just give us a call: 559-251-4283. Now we’ve been talking about all this heat we’ve got to get rid of, but haven’t really talked about where it goes. That’s where the radiator comes in. The hot coolant passes through the radiator. Air flows past the cooling fins and cools the coolant.

The radiator has two tanks that hold coolant: sometimes one the top and bottom or one on either side. If you have an automatic transmission, one of the tanks will also contain a second tank that cools the transmission fluid. Large SUV’s and trucks often have a separate transmission cooler. So when you drive around Fresno, the air is forced past the radiator. But driving doesn’t produce enough air flow. So the radiator has cooling fans that force fresh air over the radiator. These fans may be powered by a belt or by electric motors.

Now, you also have something called a heater core. The heater core is like a mini radiator. A small fan blows air over the heater core and into the passenger compartment of your vehicle. That’s how you warm your car when it’s cold out.

Next is the radiator cap. With most newer cars around Fresno, you never remove the radiator cap, except to replace it. You add coolant through the overflow tank. The radiator cap is also called a pressure cap, because its job is to maintain pressure in the cooling system.

High pressure raises the boiling point of the coolant, so it cools more effectively even in very demanding conditions. That is why you need to replace the cap from time to time. They recommend changing it out every time you replace your coolant.

Coming back to the overflow tank, it is needed because when the coolant gets hot it expands and the overflow holds the extra volume. The tank helps maintain the proper level of coolant and keeps air out of the system. You should never open the radiator cap or over flow tank when the engine is hot. This could lead to serious burns.

What else do we need to do to keep our cooling systems working well? Well, there are the hoses that hook all of these pieces together. They’re obviously very tough to deal with the pressure and high temperatures. But they do get worn. Sometimes they get spongy from the heat. Sometimes they lose their connection to the radiator, water pump, etc. It’s a great idea to have your Fresno service center inspect your hoses at least once a year and replace them, if needed, before they break.

Ball Tire can help you check your cooling system and make any necessary adjustments or repairs. Give us a call at 559-251-4283.

Your vehicle manufacturer publishes two auto maintenance schedules. The regular schedule and the severe service schedule. It’d be wrong for us to tell you that everyone in Fresno always needs to follow the severe service schedule – but its wishful thinking to say that the regular schedule is always good enough for your sedan.

Contact Ball Tire to learn more about Severe Service Requirements for your sedan
You can find us at:
4741 E Kings Canyon Rd
Fresno, California 93702
Or call us at 559-251-4283

At Ball Tire we’ll give you the definitions and explain the issues, and you can be the judge. Most manufactures list the following as severe conditions:

• Most of your trips are less than four miles.
• Most of your trips are less than 10 miles and outside temperatures are below freezing.
• The engine is at low speed most of the time – not on the highway.
• You operate your vehicle in dusty areas.
• You regularly tow a trailer or carry heavy loads.
• Driving in very hot or very cold weather.

So think about your typical week. Do you live a block from a California freeway on-ramp and enjoy a non-stop commute to work in Selma or Clovis? Or are you like the rest of us where 90% of our trips are on the severe service list?

The answer may be different at different times of the year and for the different drivers in your family. Think of the two service schedules as bookends. Let’s suppose your owner’s manual says the severe service oil change recommendation is 3,000 miles and the standard recommendation is 5,000 miles. You know that you need to change the oil somewhere between 3,000 and 5,000 miles. Look at your driving patterns and Fresno road conditions and honestly evaluate which end of the spectrum you’re closer to.

If you have a job in a neighboring town such as Fresno or Selma and most of your commute is freeway miles, you may choose the regular service schedule for your car. On the other hand, if you live within a few miles of work and only get on the highway a handful of times every month, something closer to the severe service schedule is more appropriate.

Now why is this so important? Moisture builds up in the engine oil from normal condensation. Short trips around Fresno or driving when it’s really cold means that the engine doesn’t heat up enough for the moisture to evaporate. The water in the oil leads to oil sludge that gums up your engine and doesn’t let the oil protect it as well. That’s why you need to change your oil more frequently – to get the sludge out before it causes problems.

Towing, heavy loads and very hot California summer weather means that your engine and transmission will operate at higher temperatures and with more stress. The fluids will break down more quickly. Additives that clean and prevent corrosion will be depleted sooner. Dusty conditions, which may extend also to areas with high air pollution, mean that fluids will get dirty faster and that filters will plug up and won’t work right.

All of these things can lead to premature wear and repairs down the road. They’ll also hurt your fuel economy. If you want some personalized advice, talk with your friendly Ball Tire service advisor. We can help you restore your vehicle to good working order and help you know the best schedule to follow. If you’re not sure, err on the side of protection.

Watch our informative AutoNetTV auto video tips at the top of this post.